Polycom HDX Ceiling Microphone Array Przewodnik Instalacji Pobierz pdf (Strona 2)

Setting up the Polycom HDX Ceiling Microphone Array Series

Setting up the Polycom HDX Ceiling Microphone Array for

Polycom HDX Systems

2’ (.6 m)

18” (.5 m) RJ-45

to Walta connector

adapter

10’ (3.1 m) non-

plenum straight-

through (use

between wall plate

and codec only;

do not use for any

other application)

50’ (15.2 m)

plenum crossover

(use between

electronics enclosure

and codec,

between electronics

enclosure and wall

plate, or between

two electronics

enclosures)

Notes:

• If your ceiling is 10 feet (3.05 m) or higher,

you should order an optional 6-foot (1.82 m)

drop cable (part number 2215-09591-002 for

black or 2215-09591-001 for white) for each

Ceiling Microphone Array.

• If you are creating your own cables, refer to

the Integrator’s Reference Manual for Polycom

HDX Systems for cable pin-outs. You can ﬁnd

this document at

www.polycom.com/videodocumentation.

NOTE: Verify that the number of pins on the cable

connector matches the number of pins on the

connector on the electronics enclosure.

If you do not have a suspended ceiling in your

room, continue with Step 12 on page 5.

For suspended ceilings

1 2 3 4 5 6 7 ... 15 16

Brak uwag

Polycom HDX Ceiling Microphone Array Przewodnik Instalacji Strona 2