Polycom Real-Time Media Conferencing Platform RMX 2000 Instrukcja Użytkownika Pobierz pdf (Strona 28)

Chapter 1- Hardware Description

1-22

MPM and MPM+ Modes

MPM+ and MPM cards installed in the system cannot be used

simultaneously. Therefore, the RMX can operate in either MPM or MPM+

Mode.

Operating Mode Selection During Startup / Restart

• When started with Version 4.0 installed, the RMX enters MPM+ Mode

by default, even if no media cards are installed.

• When upgrading a system from Version 3 (or lower) with Version 4.0

software downloaded from the Polycom Resource Center, the RMX

enters MPM Mode by default.

Table 4 summarizes the Operating Mode After Next Restart resulting from of

adding or swapping MPM/MPM+ cards in a running system.

• The RMX only switches between MPM and MPM+ Card Configuration

Modes if MPM/MPM+ cards are removed or swapped while it is running.

• The Card Configuration Mode switch occurs during the next restart.

• Installing or swapping MPM/MPM+ cards while the system is off will not

cause a mode switch when the system is restarted – it will restart in the Card

Configuration Mode that was active previous to powering down.

Table 4 Card Configuration Mode After Next Restart

Current

Operating

Mode

Media

Cards

Installed

Card(s)

Supported

Card(s)

Disabled

Operating

Mode After

Next Restart

MPM+

MPM

MPM x 2

None All MPM

MPM

and

MPM+

MPM+ Only

MPM

Only

MPM+

MPM+ x 2

All None MPM+

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 41 42

Komentarze do niniejszej Instrukcji

Brak uwag

Polycom Real-Time Media Conferencing Platform RMX 2000 Instrukcja Użytkownika Strona 28

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Polycom Real-Time Media Conferencing Platform RMX 2000