Polycom SpectraLink NetLink E340 Instrukcja Użytkownika Pobierz pdf (Strona 23)

SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone

Cisco CallManager and IP Phone 7960 Emulation

72-1082-02-G.doc Page 23

Username Enter a username that matches an entry on your Radius server.

Usernames are alphanumeric strings, and can be entered using the alphanumeric

string entry technique.

Password Enter the password that corresponds to this Username.

WPA-PSK The security features of WPA (Wi-Fi Protected Access) using PSK (Pre-

Shared Key) are available and may be used if supported by the APs in the facility.

Select either Passphrase and enter a passphrase between eight and 63 characters in

length or Direct Entry and enter the 256-bit key code.

WPA2-PSK The security features of WPA2 (Wi-Fi Protected Access) using PSK

(Pre-Shared Key) are available and may be used if supported by the APs in the

facility. Select either Passphrase and enter a passphrase between eight and 63

characters in length or Direct Entry and enter the 256-bit key code.



Consult the

Configuration Guide

for the APs installed in your facility for

information on which of the WPA versions are recommended by

SpectraLink engineering. Configure the recommended version on the AP

and select the corresponding option on the Admin menu.

Regulatory Domain

The Regulatory Domain will default to North America on the handset display. FCC

requirements dictate that the menu for changing the domain be available by

password, which in our case is the LINE key. To change the domain, press LINE and

then enter the digits that represent the site’s domain. Note that both digits must be

entered.

01 - North America

02 - Europe (except Spain and France); Japan (channels 1-13)

04 - Spain

05 – France



As of this writing, Spain and France are adopting the general European

Regulatory rules. Check with your wireless LAN administrator or

supplier for which domain to enter in these countries.

Transmit Power

Available transmit power is regulated by domain. The Regulatory Domain setting

above affects the options available for this setting. The default setting is

Maximum

which in North America is 100 mW. The Maximum in other domains is 30 mW.

Transmit Power may be set to a lower number if necessary by selecting one of the

other levels. If changed from the default, ensure the Transmit Power setting is the

same on all handsets and all APs.

OAI On/Off

SpectraLink’s Open Application Interface (OAI) enables third-party computer

applications to display alphanumeric messages on the handset display and take input

from the handset keypad. Refer to the

Open Application Interface

(OAI)

Specification

documentation for information about administering the OAI Gateway and the

services it can provide.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 57 58

Komentarze do niniejszej Instrukcji

Brak uwag

Polycom SpectraLink NetLink E340 Instrukcja Użytkownika Strona 23

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Bezprzewodowe Handsety Telefoniczne Polycom SpectraLink NetLink E340